Accusys ExaSAN A12S2-PS - Manual (Page 17)

1. Introduction
User Guide Page 1-9
Contact your Accusys System Integrator/Value Added Reseller or Accusys Customer
Service (see Appendix C “Customer Service and Technical Support” for more
information) to report any missing item.
1.3.1 The ExaSAN RAID
Your ExaSAN RAID disk system carton contains the following items:
1. PCIe 2.0 RAID disk system - A12S2-PS (x1)
2. Accessories package (x1)
3. Disk tray package (x1)
1.3.2 ExaSAN Accessories
The Accessories package includes the following items. These items can also be ordered,
packaged, and shipped separately from Accusys.
1. QSFP Host Bus Adapter (x1)
2. Half-high bracket (x1) for full-high bracket replacement
3. 2M QSFP copper cable (x1)
4. AC power cord cable (x2)
5. Installation CD (x1)
6. Quick Start Guide (x1)
7. Rail set (x2)
8. Rail extender (x2)
9. Screw pack for disk tray (x2)
10. Screw pack for rack (x2)
11. Power converter UK, EU, AU to US (x3)
1.3.3 Disk Tray package
The Disk Tray package is divided into two layers. Each layer holds 6 disk trays, with a
total of 12 disk trays.
1.4 SAS JBOD Expansion
The SAS JBOD Expansion is sold separately from the A12S2-PS. The SAS JBOD expansion
uses 2U 12 drive rack mount chassis similar to the A12S2-PS. The SAS JBOD expansion
can be daisy-chained, up to maximum of 3 units, from a single A12S2-PS to expand
capacity to a maximum of 48 hard drives (including the A12S2-PS). The SAS JBOD
expansions can be controlled off a single A12S-PS RAID controller, providing a cost
effective solution to expanding the RAID capacity.
Note
The SAS JBOD is not equipped with a RAID controller and thus
can not be used independently of the A12S2-PS.