Accusys ExaSAN A12S2-PS - Manual (Page 19)

1. Introduction
User Guide Page 1-11
Steady Red indicates the controller A has
failed.
Flashing Red Other error.
2 System Fan
Steady Blue indicates the fan modules
are working normally.
Steady Red indicates one or more of the
fan modules failed.
3 System Temperature
Steady Blue indicates the system
temperature is under the preset value.
Steady Red indicates the system
temperature is over the preset value.
4 System Power
Steady Blue indicates the subsystem
power supplies are working normally.
Steady Red indicates that a power
supply has failed.
5 Mute Button
Pushing the button will turn off the system
beeper when beeper is sounding. If
another abnormal event occurs, the
beeper will alarm again.
If you want to disable the beeping all the
time, please use GUI of the RAID system
and find the “Preference”to uncheck the
“Beeper”. For more information, please
refer to the section 4.1.2.7
1.5.1.2 Beeper Codes
Controller Status Beeper mode