Accusys ExaSAN A12S2-PS - Manual (Page 25)

1. Introduction
User Guide Page 1-17
power supply has failed.
10 Power Supply AC In
Connects to a power cable and power
source.
11 Power supply switch Switches the power on or off.
12 JBOD ID
Indicates the ID of the JBOD expansion
ID Range: 1 to 7
1.5.2 ExaSAN QSFP Host Bus Adapter (HBA)
No. Name Description
1 QSFP Connector Port
For connection with one of the Host
Module Ports on the switch rear panel or
A12S2-PS directly.
2
Jumper Switch LED
Indicator
• Off (no light at all) indicates the
jumper pin in question is set to “On”
position. In this state, the card is
ready for DAS direct connection
with the ExaSAN A12S2-PS.
• Solid amber indicates the jumper pin
in question is set to “1” position. In
this state, the HBA card is ready for a
SAN connection. See Section 3.1.2,
“Installing the HBA Card,” for
additional information.