Accusys ExaRAID GUI - Manual (Page 139)

Using the CLI Commands
4-8
Command cachepflush
Synopsis cachepflush [periodsec]
Description Review or set the current cache flush period.
Parameters [periodsec]: the cache flush period
Command cacheunit
Synopsis cacheunit [4kb/8kb/16kb/32kb/64kb/128kb]
Description Review or set the cache unit size.
Parameters [4kb/8kb/16kb/32kb/64kb/128kb]: set cache unit size
Command cacheflush
Synopsis cacheflush volx/dgxldy/jbdx/all [-w xxmin]
Description
Flush write buffers in the write cache of a volume, a logical
disk, a JBOD disk, or all write buffers in the cache.
Parameters [-w xxmin]: number of minutes to wait for flush completion
Command cachedirtyratio
Synopsis cachedirtyratio [dirty_ratio]
Description Review or set the dirty buffer ratio.
Parameters [dirty_ratio]: dirty buffer ratio
Command cachelist
Synopsis cachelist volx/dgxldy/jbdx/all
Description
List the setting and status of a volume, a logical disk, a JBOD
disk.
Command cachesync
Synopsis cachesync on/off
Description
Turns on or off SYNCHRONIZE CACHE command support.
Without any parameters, this command shows the current
setting.