Accusys ExaRAID GUI - Manual (Page 55)

Using the RAID GUI
2-15
2.3.2 SAS JBOD Installation with RAID subsystem
• For single controller with single JBODs:
Use the down and up stream ports to connect the RAID subsystem with
up to three SAS JBODs. Figure 2-14 shows a serial construction for
expanded JBOD disks. Connect the RAID subsystem’s SAS port to the up
stream port of a SAS JBOD using a Mini SAS cable. For more expanded
JBOD chassis, connect the down stream port on the previously
connected SAS JBOD to the up stream port on the other SAS JBOD.
Figure 2-14 Single SAS JBOD connection