Accusys ExaRAID GUI - Manual (Page 354)

Appendix
D-65
Event ID 0x2413
Type SYSTEM Severity NOTICE Parameters
Message Auto-write-through activated
Description
The pre-defined triggering events for auto-write-through
occurred, and the controller has set the buffer cache as write-
through.
Advice
Check the event logs, and remove the causes of events that trig-
ger auto-write-through.
Event ID 0x2414
Type SYSTEM Severity NOTICE Parameters
Message Auto-write-through de-activated
Description
The pre-defined triggering events for auto-write-through have
gone, and the controller restored the original cache setting.
Advice None
Event ID 0x2418
Type SYSTEM Severity NOTICE Parameters
Message Auto-shutdown activated
Description
The pre-defined triggering events for auto-shutdown occurred,
and the controller was going to shutdown itself.
Advice
Check the event logs, and remove the causes of events that trig-
ger auto-shutdown. Restart the controller. Disable auto-shutdown
first before starting investigating the causes.
Event ID 0x2419
Type SYSTEM Severity FATAL Parameters
Message NVRAM event log checksum error
Description
The checksum stored on NVRAM for event log cannot match the
contents on NVRAM. This could happen if the controller was not
properly shutdown. Because the event log on NVRAM might be
corrupt and cannot be trusted, all event logs will be erased auto-
matically.
Advice
If this event continuously happens, contact local sales or support
office.