Accusys ExaRAID GUI - Manual (Page 182)

Advanced Functions
5-9
• MPIO Device Information
When logged in, the PathGuard MPIO Utility GUI shows all connected
MPIO disks.
• Detailed MPIO device information
Click to display a complete list of MPIO disk information. You will see
the following details.
• Configure MPIO Policy Settings
Select the MPIO disk you want to configure, then click Modify to open the
configurations window.
Category Display
Device Name MPIO Disk name
Available Path The available number of paths on the MPIO disk
Host Name
The host name or IP address of host where the MPIO
device is located
Serial Number The RAID controller model name and serial number
Path Policy The path policy of the selected MPIO Disk
Table 5-1 MPIO device information
• Selected MPIO disk name,
weight mode, and switch
counter
• Physical Path ID
• Adapter Name
• LUN ID
• Path Status
• Read/Write (Byte)
• Read/Write (I/O)
• Queue
Figure 5-4 MPIO device screen