Actron CP9175 OBD II AutoScanner - Manual (Page 16)

1-4
Getting Started
Data Link Connector (DLC)
The AutoScanner ® uses a Data Link Connector (DLC) to
communicate with the vehicle’s control module.
✓
Data Link
Connector
Location.
❒
Under
dashboard on
driver side of
vehicle.
❒
If Data Link
Connector is
not located
under dashboard, a label should be there telling where
the connector can be found.
Data Link Connector (DLC) Pins
1 - Manufacturer Reserved
2 - J1850 Bus+
3 - Manufacturer Reserved
4 - Chassis Ground
5 - Signal Ground
6 - CAN High, J-2284
7 - K Line, ISO 9141-2 & ISO/DIS 14230-4
8 - Manufacturer Reserved
9 - Manufacturer Reserved
10 - J1850 Bus-
11 - Manufacturer Reserved
12 - Manufacturer Reserved
13 - Manufacturer Reserved
14 - CAN Low, J-2284
15 - L Line, ISO 9141-2 & ISO/DIS
14230-4
1
9
8
16