Actron CP9175 OBD II AutoScanner - Manual (Page 5)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • SF – 1
SF-1
Safety Precautions
For safety, read, understand and follow all safety messages and
instructions in manual and on test equipment before operating tool.
Always refer to and follow safety messages and test procedures
provided by manufacturer of vehicle and tools.
Safety messages below and throughout this manual are reminders to
use caution when using tool.
Safety Messages
Safety messages are provided to help prevent personal injury and
equipment damage.
Safety messages in this section of the manual have a signal word with
a 3 part message and, in some cases, an icon. The signal word
indicates the level of the hazard.
Signal Words Used:
Indicates a possible hazardous situation which, if
not avoided, will result in death or serious injury to
operator or bystanders.
Indicates a possible hazardous situation which, if
not avoided, could result in death or serious injury
to operator or bystanders.
Indicates a possible hazardous situation which, if
not avoided, may result in moderate or minor
injury to operator or bystanders.
Indicates a condition which, if not avoided, may
result in damage to test equipment or vehicle.
! DANGER
! WARNING
! CAUTION
IMPORTANT