Actron CP9175 OBD II AutoScanner - Manual (Page 19)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2 – 1
AutoScanner® Specifications & Power Information
2-1
Section 2 – AutoScanner ®
Specifications & Power
Information
The AutoScanner ® Keypad Configu-
ration
1 LCD Display – 128 x 64 graphic
display with contrast adjust.
2
UP arrow key – moves UP
through functions and picks YES
on questions requiring a yes or no
answer.
3
ENTER key – selects displayed
items.
4
DOWN arrow key – moves
DOWN through functions and
picks NO on questions requiring a
yes or no answer.
5
BACK
key – usually returns to
previous screen or DIAGNOSTIC
MENU and cancels the prior
selection.
6
ERASE hot key – used to run
the Erase function.
7
POWER key – turns power ON
or OFF when disconnected from
vehicle.
8 OBDII Cable – provides
connection for vehicle interface.
9 Serial Port – gives a way to get
upgrades for the AutoScanner ® .
10 Serial Number Plate – (On Back)
shows serial number.
11 Battery Compartment –
provides power to AutoScanner
®
for upgrading or reviewing codes
off-vehicle.
1
2
3
4
5
6
7
8
9
on top
11
10