Actron CP9175 OBD II AutoScanner - Manual (Page 27)

Using AutoScanner®: Diagnostic Trouble Codes (DTCs)
3-3
Erase Codes
The Erase Codes function deletes Diagnostic Trouble Codes
and clears I/M Monitors from vehicle’s computer module(s).
(See I/M Monitors.)
✓
The Erase Codes function may also erase View Freeze
Data results depending on vehicle.
✓
Check vehicle systems completely before using the Erase
Code function.
❒
Erase stored Diagnostic Trouble Codes and verify no
codes reset. A Diagnostic Trouble Code returns if
problem is not fixed or other faults are present.
✓
Before deciding repairs are done vehicle may need to be
driven so monitors can run.
✓
With the engine running a reject message could display
when trying to erase codes.
1. Prepare Vehicle.
•Turn Key On.
•Verify Engine Off.
✓
If
ERASE hot key is
available to be used an icon
shows on the display.
O
FF
ON
DIAGNOSTIC MENU
====================
Read Codes
Erase Codes
MIL Status
I/M Monitors
View Freeze Data
Review
Read Codes
E r