Audio panel and cns – Garmin G1000 Piper PA-46 Meridian User Manual

Page 117

Advertising
background image

190-00763-01 Rev. A

Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian

103

AUDIO PANEL AND CNS

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EICAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

6

COM3 – Not used in Piper PA-46 aircraft.

7

COM 1/2 –

Split COM Key. Allows simultaneous transmission on COM1 and COM2 by the pilot and copilot.

8

TEL – Not used in Piper PA-46 aircraft.

9

PA – Selects the passenger address system. The selected COM transmitter is deselected when the PA Key

is pressed.

10

SPKR – Selects and deselects the cabin speaker. COM and NAV receiver audio can be heard on the

speaker.

11

MKR/MUTE – Selects marker beacon receiver audio. Mutes the currently received marker beacon receiver

audio. Unmutes automatically when new marker beacon audio is received. Also, stops play of recorded
COM audio.

12

HI SENS – Press to increase marker beacon receiver sensitivity. Press again to return to low sensitivity.

13

DME – Turns DME audio on or off.

14

NAV1 – When selected, audio from the #1 NAV receiver can be heard.

15

ADF – Turns ADF audio on or off (optional).

16

NAV2 – When selected, audio from the #2 NAV receiver can be heard.

17

AUX – Not used in Piper PA-46 aircraft.

18

MAN SQ – Enables manual squelch for the intercom. When the intercom is active, press the PILOT Knob

to illuminate SQ. Turn the PILOT/PASS Knobs to adjust squelch.

19

PLAY – Press once to play the last recorded COM audio. Press again while audio is playing and the

previous block of recorded audio is played. Each subsequent press plays each previously recorded block.
Pressing the MKR/MUTE Key during play of a memory block stops play.

20

PILOT – Selects and deselects the pilot intercom isolation.

21

COPLT – Selects and deselects the copilot intercom isolation.

22

PILOT Knob – Press to switch between volume and squelch control as indicated by illumination of VOL

or SQ . Turn to adjust intercom volume or squelch. The MAN SQ Key must be selected to allow squelch
adjustment.

23

PASS Knob – Turn to adjust Copilot/Passenger intercom volume or squelch. The MAN SQ Key must be

selected to allow squelch adjustment.

24

DISPLAY BACKUP Button – Manually selects Reversionary Mode.

Advertising