Using xm satellite weather products, Hazard avoidance – Garmin G1000 Piper PA-46 Meridian User Manual

Page 309

Advertising
background image

190-00763-01 Rev. A

Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian

295

HAZARD AVOIDANCE

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EICAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

USING XM SATELLITE WEATHER PRODUCTS

The primary map for viewing XM Weather data is the Weather Data Link Page in the Map Page Group. This

is the only G1000 map display capable of showing information for all available XM weather products.

Viewing the Weather Data Link Page:

1)

Turn the large FMS Knob to select the Map Page Group.

2)

Turn the small FMS Knob to select the Weather Data Link Page.

NEXRAD

Weather

Product Age

and Legend

Figure 6-2 Weather Data Link Page

NEXRAD

Weather Product

Display Enabled

When a weather product is active on the Weather Data Link Page or the Navigation Map Page, the age of the

data is displayed on the screen. The age of the product is based on the time difference between when the data
was assembled on the ground and the current GPS time. Weather products are refreshed at specific intervals
(defined in the Refresh Rate column in Table 6-1).

If for any reason, a weather product is not refreshed within the 30-, 60-, or 90-minute Expiration Time

intervals, the data is considered expired and is removed from the display. This ensures that the displayed data
is consistent with what is currently being broadcast by XM Satellite Radio services. If more than half of the
expiration time has elapsed, the color of the product age displayed changes to yellow.

Advertising