Display panel, Replacing the display bezel, Removing the display panel – Dell Latitude D531 User Manual
Page 17
5.
Remove the six rubber display bumpers and two mylar screw covers from around the display bezel.
6.
Remove the eight M2.5 x 4.2 x 5-mm shoulder screws from around the display bezel.
7.
Starting at the edges of the bottom of the display panel, use your fingers to separate the bezel from the top cover, then lift the inside edges to
separate the remainder of the bezel from the top cover.
Replacing the Display Bezel
1.
Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel.
2.
Replace the eight M2.5 x 4.2 x 5-mm shoulder screws around the display bezel.
3.
Replace the six rubber display bumpers and two mylar screw covers around the display bezel.
4.
Replace the display assembly (see
Replacing the Display Assembly
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the hinge cover (see
Replacing the Hinge Cover
).
Display Panel
Removing the Display Panel
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Remove the hinge cover (see
Removing the Hinge Cover
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the display assembly (see
).
5.
).
1 mylar screw covers (2) 2 rubber display bumpers (6) 3 M2.5 x 4.2 x 5-mm screws (8)
4 display bezel
NOTICE:
Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such
as the back panel on the computer.