Removing the bluetooth assembly – Dell Alienware Aurora User Manual
Page 100
Advertising

0100
0100
/
CHAPTER 20: BLUETOOTH ASSEMBLY
2
1
1 Bluetooth assembly
2
thumbscrew
Removing the Bluetooth Assembly
NOTE: The Bluetooth
®
assembly is available on your computer only if you
ordered it while purchasing your computer.
Follow the instructions in “Before You Begin” on page
1.
6.
Remove the left side-panel (see “Removing the Left Side-Panel“ on page
2.
11).
Open the PCI shroud (see “Opening the PCI Shroud“ on page
3.
18).
Remove the drive-bay shroud (see “Removing the Drive-Bay Shroud” on
4.
page 19).
Disconnect the Bluetooth assembly cable from the connector on the master
5.
I/O board.
Loosen the thumbscrew that secures the Bluetooth assembly to the
6.
chassis.
Slide and pull the Bluetooth assembly away from the front of the chassis.
7.
Advertising