Replacing the optical drive(s) – Dell Alienware Aurora User Manual
Page 26
026
026
/
CHAPTER 5: DRIVE(S)
Replacing the Optical Drive(s)
Follow the instructions in “Before You Begin” on page
1.
6.
Remove the new optical drive from its packaging. Save the original
2.
packaging for storing or shipping the optical drive.
Remove the optical-drive bay filler (if applicable).
3.
Lift the securing tab and slide the optical drive through the front of the
4.
computer until the securing tab snaps into place.
Connect the power and data cables to the optical drive (if applicable).
5.
Close the PCI shroud (see “Closing the PCI Shroud” on page
6.
18).
Replace the left side-panel (see “Replacing the Left Side-Panel“ on page
7.
11).
Lift the drive panel towards the top of your computer.
8.
Connect your computer and devices to electrical outlets and then turn
9.
them on.