Replacing the front bezel – Dell Alienware Aurora User Manual
Page 92
092
092
/
CHAPTER 18: FRONT BEZEL
Replacing the Front Bezel
Follow the instructions in “Before You Begin” on page
1.
6.
Align the front bezel with the front of the chassis.
2.
Replace the three screws on the right side that secure the front bezel to the
3.
chassis.
Lay the chassis on its side.
4.
Connect the front-bezel cables to the connectors on the master I/O board.
5.
Replace the seven screws that secure the front bezel to the chassis.
6.
Replace the right side-panel(s) (see “Replacing the Right Side-Panel(s)” on
7.
page 81).
Replace the drive-bay shroud (see “Replacing the Drive-Bay Shroud” on
8.
page 19).
Close the PCI shroud (see “Closing the PCI Shroud“ on page
9.
18).
Replace the left side-panel (see “Replacing the Left Side-Panel“ on page
10.
11).
Connect your computer and devices to electrical outlets and then turn
11.
them on.