Replacing the processor liquid-cooling assembly – Dell Alienware Aurora User Manual
Page 49
049
049
/
CHAPTER 9: PROCESSOR LIQUID-COOLING ASSEMBLY
Replacing the Processor Liquid-Cooling Assembly
Follow the instructions in “Before You Begin” on page
1.
6.
Align the screw holes on the processor liquid-cooling assembly with the
2.
screw holes on the chassis rear wall.
Replace the four screws that secure the processor liquid-cooling assembly
3.
to the chassis rear wall.
Tighten the four captive screws that secure the processor liquid-cooling
4.
assembly to the system board.
Connect the processor liquid-cooling assembly cables to the connectors
5.
(SYS FAN and CPU PUMP) on the top lighting-board.
Replace the left side-panel (see “Replacing the Left Side-Panel“ on page
6.
11).
Connect your computer and devices to electrical outlets and then turn
7.
them on.