AASTRA 6700i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 13)

Using the Aastra 673xi / 675xi
11
Using the Aastra 673xi / 675xi
Telephoning
Making Calls
1. In order to establish a connection,
– pick up the handset or
– press the Handsfree key , to make the following call in the handsfree mode
(see Handsfree / Open-Listening Mode starting on page 15).
2. Dial a call number:
– Enter the call number using the number keys.
– Or: press the Redial key to call back a previously dialled call number. Then
select an entry with the navigation keys . Confirm with theDial out softkey or
pick up the handset.
– Or: Press the function key with the phone book function (please refer to Phone
Book starting on page 19). This function is for selecting a call number from the
phone book of the OpenCom 100 / Aastra 800 communications system.
3. Wait for the connection to be set. After about five seconds, the Aastra 673xi / 675xi
accepts the entire call number and dials. To speed up dialling, press the hash
key
after entering the call number.
Calling with Selective Line Seizure
If multiple trunk keys are configured for your telephone, you can seize a line selec-
tively
1. Press a trunk key / / to seize a specific line.
Optional: Use the left arrow key or right arrow key to select a line.
In the display the line numbers (L1, L2...) are shown and indicate whether this line
is free and can thus be seized.
2. Dial a call number (see page 11).