AASTRA 6700i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 20)

Using the Aastra 673xi / 675xi
18
3. Use the navigation keys to move the cursor onto the Line: field and press the
Change softkey. This selects a trunk key which is to be linked with the speed
dialling.
4. Press the Save softkey resp. the right arrow key on the Aastra 6730i / 6731i or
on the Aastra 6753i.
The speed dialling is now saved.
Note
You cannot remove speed dialling destinations saved to number keys (please refer to
the Deleting a Local Configuration starting on page 33).
Caller Lists
The administrator of the OpenCom 100 / Aastra 800 communications system can con-
figure “Missed calls” or “Accepted calls” function keys (seeFunction Keys Reference
starting on page 30). Use these function keys to access the caller lists managed on the
OpenCom 100 / Aastra 800 communications system. The LED indicator next to the
“Missed calls” function key additionally blinks when the caller list contains new
entries.
1. Press the function key with the caller list function.
The caller list appears.
2. Use the navigation keys to go to the desired entry.
3. Press the Dial out softkey to call the selected entry.
4. To show detailed information on the entry selected, press the Info softkey. Press
– Delete to remove the entry displayed or
– Dial out to call the entry displayed.
5. Press the Goodbye key to exit the menu card display.
Note
The list of dialled call numbers is displayed with the Redial key .