AASTRA 6700i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 23)

Using the Aastra 673xi / 675xi
21
• Unlit ( ): The subscriber is free. Press the BLF function key to call the subscriber.
• Blinking ( ): The subscriber is being called. Press the BLF function key to accept
the call (“Pickup”).
• Lit ( ): The subscriber is busy.
You can also programme a softkey with the BLF function to one of the additional key
levels. In this case, you must activate the level with the More softkey so that the LED
indicator shows the state of the subscriber connected.
Phone Lock
You can lock the Aastra 673xi / 675xi to prevent unauthorised use. Unlocking is pos-
sible only with your user PIN. This function can be executed via a function key or via
the Options menu.
1. Press the Options key .
The Options List menu card appears.
2. Use the navigation keys to select the 3.Phone Lock menu entry. Confirm with
the right arrow key or with the Select softkey.
3. Confirm Lock the phone? on the display with the Lock softkey.
Phone is locked appears on the display. When in this state, no functions can be
triggered and no calls made. It is possible, however, to accept incoming calls.
You can unlock the phone:
1. Press the Options key .
To unlock the phone and Password: appear on the display.
2. Enter the user PIN using the number keys. Confirm with the right arrow key or
with the Enter softkey.
Note
When the Aastra 673xi / 675xi is locked, emergency calls to predefined call numbers
can still be made. The admitted call number depend on the special lists assigned to
the user group (Telephony: Lists: Special lists menu). The default contains the 110
and 112 call numbers.