2 activating and deactivating the slide mode, How to activate the slide mode, Activating and deactivating the slide mode – EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual User Manual
Page 157: Select transitions to perform slide actions, Ctivating and, Eactivating the, Lide
Issue 5.8.B
IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - July 2010
144
4.11.2 A
CTIVATING AND
D
EACTIVATING THE
S
LIDE
M
ODE
H
OW TO
A
CTIVATE THE
S
LIDE
M
ODE
You can only activate the slide mode on one or more elements of the same source
media.
To activate the slide mode on one or more elements of the timeline, proceed as
follows:
1.
Click the left mouse button in the upper or lower Lasso Selection area after
the elements on which to activate the slip mode.
2.
Keeping the mouse button pressed and pressing CTRL simultaneously, drag
the mouse from left to right over the tracks that you want to select.
OR
The slide mode is activated on the tracks that are completely lassoed.
The elements on which the slide mode is active have yellow vertical bars
displayed outside the element, close to the transitions:
.
Note
When the slide mode is active on given elements, the ShuttlePRO can
also be used in slide mode on these elements.