EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 161)

6.10.6. How to Slip an Element by Setting a New
Timecode
You can slip one or more element(s) by redefining either the TC IN or TC OUT. If several
elements are selected, they must belong to the same source media and have the same
TC IN and OUT.
To slip an element by modifying the timecode, proceed as follows:
1. Select one or more elements of the same source media.
2. Right-click on the selected elements and select Set Timecode from the contextual
menu.
The Slip Timecode dialog box opens:
3. Enter the new requested TC IN or TC OUT and click ENTER to validate the new TC
value.
4. Click Apply.
The TC IN and TC OUT of the selected elements have been modified according to the
new TC information entered.
If the new timecode defined is not available in the record train, an error message will be
displayed.
6.11. Sliding Elements in the Timeline
6.11.1. Overview
Definition
Sliding an element on a timeline consists of moving its position in the timeline without
changing:
• the element duration included in the timeline
• the element TC IN and OUT points
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline 149