EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 230)

It is set for video and audio tracks.
2. (optional) To set a different mark IN point for the audio tracks, place the nowline at the
right position, then press SHIFT while setting the mark IN point.
3. (optional) If requested, set a mark OUT point to delimit the part of the timeline to be
replaced. You can also stop the process manually.
4. To start the Live to Tape process, click the button or press SHIFT + <SPACE
BAR>.
5. The nowline is automatically positioned on the video mark IN point. If a pre-roll is
defined, the nowline is positioned on the video mark IN minus the pre-roll duration.
As the Live to Tape process takes place, the nowline moves to the right and the area
already replaced is displayed on an orange background:
6. The Live to Tape process is stopped in one of the following ways:
◦ Automatically: you have defined a mark OUT and the process will be stopped
when it reaches the mark OUT.
◦ Manually: click <SPACE BAR> to stop the process.
◦ End of timeline: If the process is not stopped automatically or manually, it will be
stopped when the record reaches the end of the timeline.
The replaced part of the A/V material is available in the timeline:
218 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A