Resetting the volume, How to reset the volume on an track, How to reset the volume on a part of a track – EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual User Manual
Page 213
Advertising
During
After
6.14.10. Resetting the Volume
How to Reset the Volume on an Track
To reset the volume on the whole track loaded, proceed as follows:
•
In the Volume Automation panel, right-click and select Reset track automation
volume.
The volume of the whole track is reset to its initial volume.
How to Reset the Volume on a Part of a Track
To reset the volume on a part of the track loaded, proceed as follows:
1. In the Volume Automation panel, delimit the part of the track on which you want to
reset the volume as follows:
a. Add a mark IN point at the position to start the volume reset.
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline
201
Advertising