Opening a timeline, Introduction, Opening a timeline by a drag-and-drop action – EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual User Manual
Page 88: Prerequisites, Conditions to fulfill

•
4 tracks of respectively 2, 2, 6 and 6 mono channels
•
4 tracks of respectively 2, 6, 2 and 6 mono channels
6.2.4.
Opening a Timeline
Introduction
There are different ways to open a timeline. This section describes the two modes to open
the timeline from IPEdit.
Prerequisites
In all cases, you first need to ensure that a timeline engine is assigned to IPEdit.
Conditions to Fulfill
The timeline can only be loaded in IPEdit if the following conditions are fulfilled:
•
The timeline contains the same number of tracks and channels as the local server
configuration.
If this is not the case, you cannot load the timeline.
•
The timeline definition, at least, is stored on the local server.
If this is not the case, you can create a copy of the timeline definition and, if
requested, a copy of its elements.
Opening a Timeline by a Drag-and-Drop Action
When you open a timeline by dragging it from the Browser to the Timeline pane, you will
follow the procedure below
76
6. Timeline
EVS Broadcast Equipment S.A. - November 2012
Issue 6.00.A