EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 233)

3. Fill in the dialog box as follows:
a. Tick the radio button of the track to which you want to associate the locator.
b. Click the requested color for the locator.
c. Add a description of maximum 128 characters for the locator
4. Click Add.
The locator is added in the Timecode bar.
If you move the timeline element to which the locator is associated, the locator will move
with the clip.
6.16.3. Activating the Locators
When the Locator Selection button is disabled, the locators are 'not active': they are
displayed in grey on the Timecode bar: .
You need to click the Locator Selection button (above the Timeline Track
Selection buttons) to be able to:
• Display the locators with their respective color (example).
• Display the locator information when you position the mouse cursor on the locator.
• Select, move or modify locators.
6.16.4. How to Select / Deselect Locators
To select locators, proceed as follows:
1. Click the Locator Selection button to activate the locators.
IPDirector - Version 6.00 - User Manual - IPEdit
6. Timeline 221