EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 125)

Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
Issue 4.2.B
111
I
NSERT AND
O
VERWRITE
M
ODES
Before you drag a clip onto the timeline, you need to define the way you want to
insert it. Two modes are available: Overwrite or Insert.
You select the mode and toggle between both modes by:
• clicking the Overwrite/Insert Mode button
• pressing the keyboard key.
Mode Description
Overwrite
(default)
(white)
adds the media in the timeline, overwriting the
existing media from the selected position. In other
words, the media in the timeline will be removed
from the insertion point by the duration of the added
media.
Insert
(colored)
adds the media in the timeline without overwriting
existing media and pushes further right the existing
elements of the timeline placed after this position.
In this mode, you can only insert the media on the
clip boundaries which are common to all selected
tracks. The blank areas are not taken into account.
The possible insertion point is shown with a red
arrow on the top of the timeline: