3 voiceover process, Process overview, Defining the area to record the voiceover – EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual User Manual
Page 207: Mark in, Voiceover process, Oiceover, Rocess
Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
Issue 4.2.B
193
Note
The Digigram board controls the configuration for the audio inputs and
outputs of the workstation. It is therefore recommended to configure the
Digigram board as shown on the screenshots you will find in Appendix 3:
Digigram Hardware Settings.
11.1.3 V
OICEOVER
P
ROCESS
P
ROCESS
O
VERVIEW
The voiceover recording process includes four steps:
1. Defining the Area to Record the Voiceover (see page 193)
2. Recording the Voiceover (see page 194)
3. Checking the Recorded Voiceover (see page 195)
4. Attenuating other Tracks when Using Voiceover (see page 196)
D
EFINING THE
A
REA TO
R
ECORD THE
V
OICEOVER
Mark In
or
or
Place the nowline in the timeline where the voiceover should start, then click the