EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual - Manual (Page 176)

Issue 4.2.B Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
162
9. Editing in Place
9.1 OVERVIEW
The Edit in place feature allows the user to access and edit recorded A/V material
directly from a camcorder, a drive or a VTR like a Sony XDCAM, a Panasonic P2
or a CANON Compact Flash inside CleanEdit without any delay or file transfer
after connecting the device to his workstation or laptop. This feature is available
through the Devices tab of the CleanEdit work area.
The Devices tab provides automatically the list of connected devices to the
workstation. Selecting one or several devices should display their corresponding
content (clips) in a specific workspace from where the user is able to browse and
choose the desired A/V material for further editing.
The Devices tab interface consists of two areas. They are highlighted on the
following screenshot and shortly described in the table below: