Voiceover, graphics and text graphics, 1 adding voiceover, 1 introduction – EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual User Manual
Page 204: 2 voiceover tab overview, Adding voiceover, Introduction, Voiceover tab overview, 1 ‘adding voiceover
Issue 4.2.B
Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
190
11. Voiceover, Graphics
and Text Graphics
11.1 ADDING VOICEOVER
11.1.1 I
NTRODUCTION
CleanEdit provides a tab entirely dedicated to the recording of voiceover on a
specific audio track over one or several parts of the edit. The current section
describes the voiceover process managed with CleanEdit.
Some users prefer to record voiceover with an external audio mixer. This process,
schematized hereafter, is supported by CleanEdit as well. Then, the audio mixer
stereo output is used as input for the CleanEdit audio board.
As the use of digital audio capture devices could cause a variable delay between
the recorded audio and the video, this can be corrected thanks to the Latency
Delay Offset setting in Xedio Manager > Softwares > Parameter Profiles >
CleanEdit > Voiceover.
11.1.2 V
OICEOVER
T
AB
O
VERVIEW
The Voiceover tab is made up of the main areas highlighted on the following
screenshot and shortly described in the table below.