2 adding a logo or graphic, 1 introduction, 2 accessing the tag manager window – EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual User Manual
Page 211: Adding a logo or graphic, Introduction, Accessing the tag manager window, 2 ‘adding a logo or graphic, Ntroduction, Ccessing the, Anager
Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
Issue 4.2.B
197
11.2 ADDING A LOGO OR GRAPHIC
11.2.1 I
NTRODUCTION
You will use tags to add a logo or still graphic. Tags are reference points marked
on the timecode bar to trigger an event, such as the insert of a graphic or logo.
Tags are created and managed via the Tag Manager window.
11.2.2 A
CCESSING THE
T
AG
M
ANAGER
W
INDOW
To access the Tag Manager window, you can:
•
right-click on the Timecode bar in the timeline display and select Add Tag
from the contextual menu:
•
press the keyboard shortcut
. In this case, the tag position is defined
based on the Mark IN and Mark OUT points, or nowline position. For more
information, refer to the description of the TC in and TC Dur fields in the
section 11.2.4 ‘Fields in the Tag Manager Window’, on page 199.