Logs display selection – EVS XEDIO CleanEdit Version 4.2 - June 2012 User Manual User Manual
Page 88

Issue 4.2.B
Xedio Suite Version 4.2 – User Manual – CleanEdit
EVS Broadcast Equipment – June 2012
74
The external logs correspond to logs created in and imported from IPDirector, if
the installation is properly set up. An interest ranking is assigned to them.
They are shown on the media bar as transparent triangles. Their outline color
depends on the rating assigned to them in IPDirector.
There is always a black stripe below the video display when external logs are
present on the loaded media/clip. When the nowline is on an external log
timecode, a transparent triangle appears on the left of this black stripe. If
keywords have been associated to the log, they are written next to the triangle.
Example with a 16:9 aspect ratio:
Example with a 4:3 video aspect ratio display:
Logs Display Selection
When you right-click on a log on a media bar where the two types of logs are
displayed, a contextual menu appears and let you select the logs that should
appear: