Hotchkis 22425 Scion TC Sport Sway Bar Set - Manual (Page 10)

8) Place the provided bushing bracket over the bushing and set the sway bar into it’s proper position.
Install the provided nut and bolt & flat cut washer to secure the bracket to the frame of the vehicle.
Note: Use Bushing prt # 5341
9)
Lastly, secure the end links on to your new Hotchkis sway bar. Adjust your sway bar stiffness by
selecting one of the 3 holes on the end of the bar. The hole closest to the end is the softest setting.
14)
Re-check all hardware for tightness. Use a jack to remove the jack stands and you’re finished! Enjoy
your new Hotchkis sway bar kit!