Hotchkis 22425 Scion TC Sport Sway Bar Set - Manual (Page 8)

INSTALLATION OF HOTCHKIS REAR SWAY BAR
1)
Securely block the front wheels of the vehicle. Use a jack to lift up the rear of the vehicle and support
with jack stands. As with the front installation, you should not remove the rear wheels.
2)
Remove the end link nuts that secure the sway bar to the end links using a 14mm wrench (and 6mm
allen wrench if necessary). Retain this hardware for reinstallation.
3)
Remove the nut and bolt for each side subframe mount using a 14mm socket. You may discard this
hardware.
4)
Remove the subframe bushing and bracket to ease the removal of the bar from the vehicle. You may
discard the old bushing and bracket. Gently pull the sway bar towards the front of the car and the
driver side end should be free to drop out.