Hotchkis 22425 Scion TC Sport Sway Bar Set - Manual (Page 7)

12) Once the cradle is reinstalled, attach the end links to the sway bar and torque the nuts to 32 ft-lbs. For
adjustable sway bar stiffness, refer to picture below.
Important Note: Double check to make sure the power steering line is not in contact with the sway bar.
If so, you can carefully bend the metal line away from the bar, which clearances the rubber hose from
rubbing against the sway bar.
13)
It’s a good idea to also check the power steering boot clip clearance for each side. If the clips are
pointing toward the sway bar than it may rub against it. Simply rotate the clip away from the sway bar
to avoid any rubbing issues.
14)
Re-check all hardware for tightness. Use a jack to remove the jack stands and you’re ready to move on
to the rear sway bar!