Hotchkis 22425 Scion TC Sport Sway Bar Set User Manual
Page 4
8)
With all the nuts & bolts removed the cradle should droop loosely enough to reach the sway bar
mounted to the top rear portion of the cradle. Use a 14mm socket or wrench to loosen and remove the
four bolts holding the stock sway bar in place. Remove the stock sway bar, bushings and brackets.
Retain the stock bolts for re-installation.
9)
With the stock sway bar removed, set your new Hotchkis bar next to it for reference and orientation.
10)
Re-install your new Hotchkis sway bar in the same manner as the stock sway bar removal. Install
using the included Hotchkis polyurethane bushings and brackets. It’s a good idea to install the
bushings and brackets after the bar is in position. Lube the inside of each bushing with the provided
grease. Use bushing prt # 5339.
Note: On the passenger side, makes sure the sway bar is positioned inboard of the power steering
hose shown in the picture below.