MSD 6214 Midget DIS-2 Programmable Race Ignition Installation - Manual (Page 11)

INSTALLATION INSTRUCTIONS 11
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ALERTS
Alerts – (Default - (1) Scan -
The Alerts will provide a flash code to the LED on the outside of
the Ignition.
This indicates a Low Battery situation. This will blink the LED two times.
The Options are: Scan (to enable)
Skip (to disable)
This indicates that the Ignition is not receiving a trigger signal from
one of the pickups. This will blink the LED three times.
Continued...
6214 M01
Monitor
Stats
Stat 1
RevLim
RevMax
•
Rpm 9500
Retards
RunCurve
•
Rpm 800
Run
Copy@
RetDeg .0
Start
StartRetard
•
Deg15
AltCurve
•
Rpm 800
Alt
Copy@
RetDeg .0
Continued...
Batt
•
BattType Lead
•
BattCells 6
Alerts
Alert 1
•
(1) SCAN
•
(1) SCAN
AlertsPer
•
Alerts/Scan 0
Data Editor Window
Note: 6214V01. Uses menu 6214 M01. Programmable Midget Ignition Factory default data and menu.
Alert (1) SCAN
LowSPARK
Alert (2) SCAN
DisLost
MENU TREE
The following menu tree shows the different screens and programs of the PN 6214 and Monitor.
Monitor Stats
RevLim Retards*
Monitor List:
1 ScanTime 1Sec
2 DisIn OK
3 Rpm 12500
4 Retard 00.0
5 Curve RUN
6 BatVolt 12.0
7 BatThes 10.8
8 BattLow 12%
^s ScanTime 1Sec
H Rpm 12500
^RunCurve Start
AltCurve
^Stat 1 SCAN
ScanTime #Sec
^Rpm###00 Run
Copy RetDeg##.#
Alert List
2.LowSpark
3. DisLost
^StartRetard
Deg##
Menus
PN 6214 Flow Chat with Hand Held Monitor
^RevMax
Rpm ###00
^Rpm###00 Alt
Copy RetDeg##.#
6214 M01 Terminal Screens
as displayed on the 7550 Terminal
BattType
Lead
NiCad
NiMH
BattCells
6, 7, 8, 9, 10, 11, 12
Batt Alerts*
AlertsPer
^Alert# SCAN
LowSpark
^BattType$$$$
BattCells##
^Alerts/Scan#
DisLost