MSD 2910 Atomic EFI Master Kit Installation - Manual (Page 21)

INSTALLATION INSTRUCTIONS 21
M S D
• W W W . A T O M I C E F I . C O M • ( 9 1 5 ) 8 5 5 - 7 1 2 3 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
MSD Atomic EFI Trouble Shooting
No
No
No
No
No
No
No Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes No
Have you completed
the Pre-Start Checklist
in the Atomic
instructions?
Does the
engine start?
Please check
all of the
items on that
list before
continuing.
Did the system
show an RPM
signal during
cranking?
Please check
for power to
the fuel pump
or other fuel
issues.
Did that RPM
signal correlate
to the actual
engine speed?
Please check to
see the Atomic
is getting a
proper trigger
signal from the
distributor or
ignition box. Is it possible
that the engine
is flooded?
Please check to
see the Atomic
is getting a
proper trigger
signal from the
distributor or
ignition box.
Does the
engine have
spark?
Please follow
the Flood Clear
directions on
page 13.
Check the
ignition system
to ensure
proper
functioning.
Engine starts! Go to
the next page.
Does the
engine start?
If each of the
aforementioned items
checks out and the
non-start issue still exists,
Please contact MSD
Customer Support at
915-855-7123.
Did the system
show proper
Fuel
Pressure?