Ohaus AP250E ANALYTICAL Plus Electronic Balances - Manual (Page 54)

54
Time (Cont.) Time (Cont.) Time (Cont.) Time (Cont.) Time (Cont.)
6. .
7. first two digits are flashing.
8. or to change flashing digits to current local hour.
9. flashes the last two digits.
NOTE NOTE NOTE NOTE NOTE: will back up display.
10 or changes minutes display.
11. to accept. AM or PM is flashing, A for AM, P for PM.
12. to select AM or PM.
13. .
Adjust Adjust Adjust Adjust Adjust
Adjust is a feature which enables the internal clock of the balance to be corrected
+ or - 59 seconds a day. The internal clock is accurate to within 8 seconds a day. To
enter or subtract time, proceed as follows:
1. Access the submenu which is under the Time sub
menu.
2. . First digit is flashing.
3. to change first digit (ten seconds) from 0 to +5 or -5.
4. , seconds digit is flashing.
5. to change seconds from 0 to 9.
6. .
7. .
8. .
MENUS