Ohaus AP250E ANALYTICAL Plus Electronic Balances - Manual (Page 61)

61
Good Laboratory Practice (GLP) (Cont.) Good Laboratory Practice (GLP) (Cont.) Good Laboratory Practice (GLP) (Cont.) Good Laboratory Practice (GLP) (Cont.) Good Laboratory Practice (GLP) (Cont.)
NOTE NOTE NOTE NOTE NOTE: allows going back to the previous digit for correction.
5. accepts value and moves to second digit.
6. to change next digit.
7. Repeat steps 4 through 6 to change all digits.
8. .
9. to enter project number.
10. and repeat steps 3 through 7.
11. .
Print Options Print Options Print Options Print Options Print Options
This submenu contains additional features which can be set and include Auto Print,
Initialize Auto Print, Stable Data only, Numeric Data only, Time, Date and Reference
data and Difference. To change any of the above listed options, enter the submenu.
Auto Print Feature Auto Print Feature Auto Print Feature Auto Print Feature Auto Print Feature
When enabled, the Auto Print feature causes the balance to automatically output
display data in one of three ways: continuously, at user specified time intervals, or upon
stability.
To select one of these Auto Print methods, or to turn the feature off:
1. Access the submenu.
2. .
3. , ,
or .
4. .
NOTE NOTE NOTE NOTE NOTE: If you select interval to automatically output data at user specified time
intervals, the interval is entered in the Initialize submenu which follows.
MENUS