Shogun Motorsports Kawasaki Ninja 300R DMP Fender Eliminator Instructions User Manual
Page 4
Advertising
Moto911 Inc. - 1062 Calle Negocio, Ste. J, San Clemente, Ca. 92673
– (949)453-9111
11. Remove the four fender bolts located in front of the tail light
12. Remove the wire holders
13. Expose all the fender tail section wiring
14. Remove the cap where the wires enter the tail section from the fender (this piece will be
reused). With the connections removed gently remove the fender pulling the wires and
connectors through the open hole.
Advertising