Shogun Motorsports Yamaha R6S (06-09) NO CUT Frame Slider User Manual

Shogun Motorsports For motorcycles

Advertising
background image

Yamaha R6 03-05/R6S 06-09 NO CUT Frame

Slider Installation Instructions

Part Numbers: 750-6309, 755-6309, 750-6300,

850-6300C

MADE IN THE USA!
Carefully read instructions in their entirety before the install

Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.

Shogun is not responsible for any part of your motorcycle for any reason.

Precisely

measure location of cut and if in doubt at any point please call us before the install process has begun.
Some photos may be used for illustration examples only.

Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY

Price each

Part Numbers

Descriptions


1

$20.00

99-FS-750-6309-L

Black Left Side Puck

1

$20.00

99-FS-750-6300-L

White Left Side Puck

1

$30.00

99-FS-850-6300C-L

Polished Billet Left Side Puck

1

$20.00

99-OF-750-6300-L

Left Side Offset Black Anodized

1

$2.00

99-HB-SH10150035

Socket Cap 10 X 1.5 X 35 (Holds puck to offset)

1

$3.50

99-HB-SH10125060

Socket Cap 10 X 1.25 X 60 (Goes Though the Offset into

the Frame) Main Engine Stud

Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1

$20.00

99-FS-750-6309-R

Black Right Side Puck

1

$20.00

99-FS-750-6300-R

White Right Side Puck

1

$30.00

99-FS-850-6300-R

Polished Billet Right Side Puck

1

$20.00

99-OF-750-6300-R

Right Side Offset Black Anodized

1

$2.00

99-HB-SH10150035

Socket Cap 10 X 1.5 X 35 (Holds puck to offset)

1

$3.50

99-HB-SH10125050

Socket Cap 10 X 1.25 X 50 Main Engine Stud






Frame Sliders: Right frame slider longer than left.
Offsets: Both offsets have a flat side (side that the frame slider mounts to). Lay both flat sides on a
table, the one that is taller (or thicker) is the left side.

Some photos may be used for illustration examples only.

Installation Steps:

1.

Remove left and right body panels

Advertising