Veris Technologies MSP EC and pH (1997-2008 floppy disk drive 1.02E) - Operating Instructions - Manual (Page 11)

Veris Technologies
Pub. #OM MSP03-1
11
Back on the PC, select the Transfer drop down menu, then Capture Text:
A window will come up asking what the captured file will be named and where it will be stored. Use
the Veris file name and number from the instrument’s screen. Make note of where the file is being
stored or change it to the appropriate folder. Click the start button once you have named the file:
On the instrument, press 1 to start the transfer. The instrument will show its progress in sending the
file. If the transfer is successful, you will see text scrolling down the screen in HyperTerminal:
If you do not see text scrolling down the screen, wait for the instrument to finish sending data, shut off
the instrument, close the HyperTerminal session, reopen it and turn the instrument back on. Repeat