Veris Technologies MSP EC and pH (1997-2008 floppy disk drive 1.02E) - Operating Instructions - Manual (Page 44)

Veris Technologies
Pub. #OM MSP03-1
44
Replace sampling trough liner, scraper cutting edge when wear is apparent.
Hydraulic power pack
Refer to provided Honda manual for complete information on Honda engine.
Before filling tank with gasoline, let engine cool. Gas vapors can
ignite and an explosion can occur.
SERVICE REQUIRED
INTERVAL
Hydraulic Fluid Check level at site glass on hydraulic fluid reservoir. Daily
Maintain within 1/2 inch of upper (solid black) line.
Drain fluid from reservoir and refill with hydrualic oil Annually
(100-400 ssu at min/max operating temperatures)
Hydraulic Fluid Filter Remove canister and replace filter cartridge. Annually
Hydraulic Hoses, Lines, Inspect for cut, collapsed, bulged, or leaking hoses Weekly
and Fittings and lines. Check for leaking fittings.
Engine Oil Check Level as Instructed in Honda Engines Manual.
Change as Instructed in Honda Engines Manual.
Engine Air Cleaner Check as Instructed in Honda Engines Manual.
Clean as Instructed in Honda Engines Manual.
Replace as Instructed in Honda Engines Manual.
engine oil
dipstick
knock worn
shoe off from
rear
tap new shoe
on with 2x4