Veris Technologies MSP EC and pH (1997-2008 floppy disk drive 1.02E) - Operating Instructions - Manual (Page 17)

Veris Technologies
Pub. #OM MSP03-1
17
• Pinch point hazard: to prevent injury, stand clear when raising or lowering any part of the Veris
MSP. Disengage automatic cycling function before working around unit.
• Install all transport locks before transporting or working underneath.
Collecting Soil EC Data
If unit is equipped with pH Module, and you are not collecting pH data, remove sampler shank and
raise row cleaner and covering disks.
Turn on Veris instrument. The first screen to appear contains the software version number and
shows how much logging time is available.
The computer is informing you of how much of its internal memory is available. Check available
memory to be sure you have enough to contain the data from field you are about to map.
NOTE: The computer will not continue to log data when the memory free drops to 50%. Options:
Press any key and proceed to menu options.
1. Download/Delete old files: For information on Option 1, see section on Downloading.
2. Continue: Pressing this key will bring up the next display and continue to the next operating
screen
Press 1 to bring up the data acquisition menu (see below for more details) (setup options are only for
pH data acquisition, and are covered in pH Module manual)
Select the type of data you want to collect from the above menu.
set screws and jam
nuts