VTech CS6829 Manual - Manual (Page 32)

28
Multiple handset use
Call transfer using intercom
Use the intercom feature to transfer an outside call to another
system handset.
During a call, press INT.
If you have two handsets, the outside call is put on hold and
your handset displays Calling HS X.
If you have three or more handsets, your handset displays
Intercom to. Use the dialing keys to enter a handset number.
The outside call is put on hold and your handset displays
Calling HS X.
The destination handset rings and its screen displays
HS X is calling.
To answer the intercom call on the destination handset, press
, , INT or any dialing key (0-9, TONE or QUIET
#
).
The outside call is still on hold and both handsets now display
Intercom. You can now have a private conversation with the
destination handset.
To cancel the intercom call before it is answered, press OFF,
or INT on your handset.
If the destination handset does not answer within 100 seconds,
is in use, on a call or is out of range, the originating handset
displays Unable to call and then reconnects to the outside call.
3. From this intercom call, you have the following options:
You can let the destination handset join you on the outside call in a
three-way conversation. Press and hold INT on the originating handset.
You can transfer the call. Press OFF, or place your handset back in the
telephone base or charger. Your handset displays Transferred. The destination
handset is then connected to the outside call.
You can press
INT to switch between the outside call (Outside call displays) and
the intercom call ( Intercom displays).
The destination handset can end the intercom call by pressing OFF, or by placing
the handset back in the telephone base or charger. The outside call continues
with the original system handset.
1.
•
•
2.
•
•
•
•
•
•
Intercom to
Calling HS X
HS X is calling
ECO
ECO
ECO
Intercom
ECO