VTech CS6829 Manual - Manual (Page 50)

46
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be
heard while they are being recorded.
To turn this feature on or off:
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press SELECT to choose Call screening.
Press or to choose Screening: On or Screening: Off,
then press SELECT to confirm your selection. You hear a
confirmation tone.
Number of rings
You can set the answering system to answer an incoming call
after two, three, four, five or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you
have new messages, or after four rings when you have no new
messages. This enables you to check for new messages and
avoid paying unnecessary long distance charges if you are
calling from outside your local area.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to # of rings, then press SELECT.
Press or to choose 6, 5, 4, 3, 2 or Toll saver,
then press SELECT to confirm your selection. You hear a
confirmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Ans sys setup
ECO
Call screening
ECO
Screening: On
ECO
Ans sys setup
ECO
# of rings
ECO
3
ECO