VTech CTM-S242SD Manual - Manual (Page 76)

72
To answer an intercom call:
Lift the cordless handset from the telephone base, charging base or charging stand, or press INTERCOM on the
cordless handset when it is not cradled on the telephone base, charging base or charging stand.
-OR-
Press INT or /SPEAKER on the telephone base.
To answer an incoming call during an intercom call:
Press
TALK on the cordless handset or press /SPEAKER twice on the telephone base. The intercom call ends automatically.
To end an intercom call:
Press OFF or place the handset back in its charging base.
-OR-
Press INT or /SPEAKER on the telephone base.
Find handset
Use this feature to find all registered cordless handsets.
To start paging:
Press
/FIND HANDSET on the telephone base when the phone is not in use. All idle cordless handsets beep for 60 seconds.
To end paging:
Press /FIND HANDSET again on the telephone base.
-OR-
Press any key on the cordless handset to stop the paging tone.
Computer port
You can route your computer through the
COMPUTER port (RJ-45) on the side of the telephone base to get Internet access.
USB port
The
port on the side of the telephone base can be used for charging devices (up to 500mA @ 5V). Charging will be suspended
when there is an incoming call or the telephone is in use.
•
•
•
•
•
•
SIP contemporary cordless 1-line - S2410/CTM-S2411
Telephone operation