VEGA VVO VEGA Visual Operating - Manual (Page 11)

VEGA Visual Operating 11
Start VVO
This message appears when during VVO-
start or during connection an instrument is
connected for the first time to the PC with
VVO. Click to
Yes.
Possibly you have several signal conditioning
instrument in a system. The data of these
instruments can be coordinated to a group
(called here "DISBUS-group“ ) and saved (in
directory C/VEGA/VVO/Data). When a new
instrument is added, you can decide whether
this instrument should be coordinated to the
existing group ("already existing group“) or
whether a new group should be created
("new group“). In the example this "new
group“ has the name "MET02.M00“, as it is a
signal conditioning instrument VEGAMET. You
can give this "group" another name. Click to
OK and the data of the connected instrument
are transmitted to the PC.
After data transmission, VVO shows
which instrument is connected to the PC
or to the VEGACONNECT 2, in this
example a signal conditioning instru-
ment VEGAMET 614 or 614V.